Continuing Education Courses
State: Florida

 This course is presented in a single video that will take 45 minutes to watch. Please be prepared to watch the video in its entirety in one sitting.

1. Introduction of Iodine
   1. Properties of Iodine
   2. Iodine in Fertilizer
   3. Sources of Iodine
2. Iodine Nutrient Deficiencies in Plants and Animals Overview
3. Fundamental Science Behind Iodine as a Plant Nutrient
4. Effect of Iodine on Phenotype
5. Modulation of Gene Expression
6. Iodination of Plant Proteins
7. Overview of Plant Science Research on Iodine as a Plant Nutrient
8. How to Properly Apply Iodine in Fertigation
9. Crop Response to Iodine Additions from a Global Perspective
10. Iodine Research in North America
11. Regulatory Update

Organic/Sustainable Agriculture Production and Benefits of Humic Substances:

This course focuses on sustainable organic farming practices and cultural and biological pest management without the use of synthetic chemicals. This course will provide a general overview of the most common pests in organic/sustainable agricultural systems and current methods of controlling insect pests, weeds and diseases in a range of organic crops grown in the United States. Organic/sustainable agriculture is expanding rapidly in the US with an average annual increase of 12% during the last 15 years. In the early years, organic production was limited and typically meant small farms and roadside stands. Now, however, the growing demand for organic produce is attracting conventional producers and retailers. Organic product sales now exceed $32 billion in the US.

Navel orangeworm (NOW), Amyelois transitella, first appeared in California in the early half of the 20th century and rapidly increased. Currently, navel orangeworm is the primary pest of almonds, pistachios and walnuts, and also present in citrus, stone fruit, pome, date, and fig crops, impacting the dynamics of the pest in California as hosts for the pest. This course discusses the threat of navel orangeworm in nut crops, as well as best management practices for treatment.

This course is accredited for the following licensing categories: PCAs, Qualified Applicators, Private Applicators, Aerial Applicators, and County Permit Holders.

As of January 2018, there were approximately 2.63 million managed honey bee colonies in the U.S. Over 500,000 make their home permanently in California, while another 1.5 million hives are moved into the state annually to augment the pollination demands of California’s almond crop alone. This means slightly fewer than 79 percent of the managed hives in the U.S. are used to pollinate a single California crop.

In 2019 there are about 1.16 million planted acres of almond orchards in California, with mature trees on bearing acreages capable of producing more than 2.27 billion pounds of almonds annually. Growers usually rent two colonies of honey bees per bearing acre.

“Honey bees are essential to almond production,” said Bob Curtis, pollination consultant and retired director of Agricultural Affairs for the Almond Board of California. “Every almond we eat exists because a honey bee pollinated an almond blossom so it’s in farmers’ best interest to keep them safe. Our livelihood depends on it.”

As important as managed honey bees are to almonds and the more than 100 other crops they pollinate, pesticides and insecticides used to protect crops against pests are also important. Farmers and crop protection specialists recognize that and work diligently to ensure that pollinators and pesticides can co-exist in balance.

This course will examine the stressors on the honey bee population such as Colony Collapse Disorder, nutrition, pesticides, parasites and pathogens as well as rules and legislation to protect honey bees. 

This course discusses mite control in major crops and is sponsored by BASF. Mites are small arthropods in the class Arachnida and the subclass Acari. Although they are related to insects, mites are in the arachnid class and are closely related to spiders and ticks. They are common pests in agriculture, landscapes, and gardens. Mite species are estimated to number nearly 50,000. They live in diverse habitats; in soil, water or plant matter. They eat living and dead plant material as well as fungi, lichens, and even carrion. Some are parasites on animals and others feed on mold. This course will focus on the mites that threaten nut trees, pome fruit, grape, strawberry, tomato, and citrus crops.

Potassium nitrate is used in agriculture, industry, solar energy plants, food and pharma. In agriculture, the main uses of potassium nitrate are related to the supply of plant nutrients via fertigation, foliar and field applications. Potassium nitrate has also proven to be a valuable tool in crop pest and stress management and has shown positive effects on the control of plant pests and diseases when applied or as an additive to crop protection agrochemicals, thus allowing the grower to practice more effective and judicious use of pesticides. When used correctly, potassium nitrate can be a valuable and economic source in any Integrated Pest Management (IPM) strategy, not only for its effective and environmentally sensitive aspects, but for its effects on overall plant health, thus creating a stronger, more resistant plant. This is demonstrated in this course by a number of examples of pest management with potassium and nitrate sources. This course also has a section on the role of nutrients in IPM and is sponsored by SQM.

The course was developed by Informa/Farm Progress and will provide an overview of the top disease and pest threats to citrus orchards in California, Florida, and Texas.

This course is sponsored by Western Farm Press. There are an estimated 150,000 named species in the insect group called Lepidoptera. Outnumbered only by the beetles, Lepidoptera represent the second-most diverse order of insect pests, and virtually every cultivated plant is attacked by at least one type. They are ready to defoliate and weaken plants or mine plant tissues, leaving holes and frass behind and rendering crops unmarketable. Their scientific name comes from the Greek Lepidos, for “scale,” and Pteron, for “wing”--literally “scale wing,”--because the wings of adult butterflies and moths are covered with microscopic scales. This course will specifically highlight six lepidopterous pests: the beet armyworm, cabbage looper, diamondback moth, tomato fruitworm, tomato pinworm and western yellowstriped armyworm. The course will also cover managing Lepidopterous pests in a wide array of crops and includes an additional section on Pesticide Safety.

This online course covers the management of spray drift to minimize problems. Spray Drift Management (SDM) has been a critical element for Western agriculture for decades. Keeping crop protection chemicals on the crop for which they are intended has been a cornerstone of Western farming not only to protect neighboring crops, but to avoid wasting money by allowing products to drift off the intended target. Spray drift management has taken on greater significance as cities encroach upon rural areas. Every year, increasingly more houses and other types of developments are springing up in prime growing areas, oftentimes alongside fields, orchards or vineyards. This leads to increased concerns about the use of agricultural chemicals and the ways they are applied. This course will review many aspects of spray drift – from practical, hands-on ways to minimize drift, to the regulatory issues surrounding it.

Este curso en línea cubre el manejo de la deriva de aspersión para minimizar los problemas. La gestión de la deriva de la pulverización (SDM) ha sido un elemento crítico para la agricultura occidental durante décadas. Mantener los productos químicos para la protección de cultivos en el cultivo al que están destinados ha sido una piedra angular de la agricultura occidental no sólo para proteger los cultivos vecinos, sino también para evitar el desperdicio de dinero al permitir que los productos se desvíen del objetivo previsto. La gestión de la deriva de la pulverización ha adquirido mayor importancia a medida que las ciudades invaden las zonas rurales. Cada año, surgen cada vez más casas y otros tipos de urbanizaciones en zonas de cultivo privilegiadas, a menudo junto a campos, huertos o viñedos. Esto genera una mayor preocupación sobre el uso de productos químicos agrícolas y las formas en que se aplican. Este curso revisará muchos aspectos de la deriva de la aspersión, desde formas prácticas para minimizar la deriva hasta las cuestiones regulatorias que la rodean.

This online course covers managing spray drift to minimize problems. Spray drift management (SDM) has been a critical element of Western agriculture for decades. Keeping crop protection chemicals on the crop they are intended for has been a cornerstone of Western agriculture not only to protect neighboring crops, but also to avoid wasting money by allowing products to stray from their intended target. Spray drift management has taken on greater importance as cities encroach on rural areas. Every year, more and more homes and other types of developments are springing up in prime growing areas, often adjacent to fields, orchards, or vineyards. This is leading to increased concern about the use of agricultural chemicals and the ways in which they are applied. This course will review many aspects of spray drift, from practical ways to minimize drift to the regulatory issues surrounding it.

This course will provide an overview of several areas that are key to pesticide safety and application. We will cover subjects such as types of licenses, Personal Protective Equipment (PPE), labeling and label interpretations, application equipment and techniques, first aid and decontamination procedures, and Integrated Pest Management (IPM) and techniques. It is critical that the fundamentals are taught and reviewed regularly by all applicators and advisers.

Western Farm Press is pleased to sponsor The ABCs of MRLs CEU course. American agriculture exports 20 to 30 percent of its production annually. With many crops, like the specialty crops grown in California, the percentage of exports can be much higher. Like almonds, for example - more than 70 percent of this important California crop is exported annually. Although the pesticide registration process in the U.S. establishes acceptable pesticide residue levels for products used in the U.S., many foreign governments are increasing oversight and testing of imported food items for possible pesticide residues. When recommending and applying pest management products for crops, licensed Pest Control Advisers (PCAs), Certified Crop Advisers, consultants, applicators and farmers in the U.S. must be sure products applied are in compliance with Maximum Residue Limits (MRLs) established by the governments of foreign customers. Failure to meet MRLs could be the loss of shipments and customers at considerable expense.

GM alfalfa has been back on the market for about six years, after a detour through the courts that began not long after it was first introduced in 2005 as the fifth glyphosate-resistant crop to be commercialized.

In production agriculture, weeds or “misplaced plants” have a tendency to tolerate suboptimal conditions much better than most crops. However, they grow more and produce more seed under optimal conditions than they do under suboptimal. For example a nine-foot tall horseweed growing in a vineyard produces 800,000 seeds while a foot tall horseweed growing on a dry, hard road shoulder produces only about 1,000 seeds. Weeds are unwanted plants that compete with crops for nutrients, light and water, and can be detrimental to crop yields. Integrated weed management (IWM) programs and orchard cultural practices have been developed for specific orchard and vineyard crops. This accredited CEU provides information on economically and environmentally sound IWM practices. This course will provide an overview of important weed control and management practices as well as some insight into managing for herbicide-resistant weeds.

The purpose of this course is to give the reader an overview of key practices that can help avoid or delay selecting for herbicide-resistant weeds and pesticide-resistant pests while managing weeds and pests in the field, particularly for cotton growers.

Weeds are defined as any plants that “interfere with the growing of crops or ornamental plants; endanger livestock; affect the health of people; interfere with the safety or use of roads, utilities, and waterways; or are visual or physical nuisances." Weeds can pose fire hazards and exacerbate allergies. They can clog canals, harbor insect pests, and poison people and animals.

The purpose of this training is to give you an overview of important management practices that can help avoid or delay the development of herbicide-resistant weeds. We will begin with a brief review of common weed types and herbicides, followed by factors that can influence the evolution of resistance in weeds, and methods for potentially delaying its occurrence in agronomic row crops and permanent crops. While weed resistance management guidelines may be introduced and discussed under a specific annual or perennial crop heading, many of the WRM techniques have cross-crop applicability. When using pesticides for resistance management, always check the label for specific registered uses and the Herbicide Group Number for Mode of Action (MOA), as well as contact your local University Extension Advisor, PCA, and/or manufacture representative.